For facility managers and building operations leaders
Your BMS is only as reliable as the network underneath it.
HVAC, lighting, fire, access control and air quality now talk over Ethernet and BACnet/IP. TCG designs, cables, segments and supports that network, working alongside your controls contractor, so your building stays safe, comfortable and efficient.
- Free on-site or remote walk-through
- Written 10-point network scorecard
- Prioritized fix list with budget ranges
- No cost and no obligation
Free · No obligation
Book your free BMS Network Assessment
Two quick steps. Takes about a minute.
Request received
You're on the schedule list.
A TCG project lead will contact you to set up your walk-through. If it's urgent, call us at (586) 765-0770, Monday to Friday, 7am to 6pm.
Sound familiar?
Many BMS problems that look like controls issues start in the network.
Controllers drop offline
And nobody can say whether it's the network, the BMS or the device.
Alerts arrive late
Fire, access or equipment alarms take too long to reach the people who need them.
IT won't approve remote access
Because the BAS shares a flat network with everything else in the building.
Old serial trunks hold you back
Adding sensors, analytics or new equipment on MS/TP is slow and expensive.
Utility bills keep climbing
Equipment runs off schedule, or heats and cools the same space at once.
Everyone points at someone else
IT says it's a controls problem. The controls contractor says it's the network.
TCG owns the layer in between: the cabling, switching, segmentation and support your BMS depends on.
Check my building's networkWhy Ethernet changes the game
Same building. Roughly 8,700x more headroom.
Legacy BACnet MS/TP over RS-485 tops out at 115.2 kbps. A gigabit BACnet/IP network carries real-time trends, analytics and remote access without choking.
- Speed for real-time controlFast, reliable alarm paths and live data from every floor.
- Room to scale and integrateRoute across subnets, add IoT devices and connect to cloud platforms.
- Diagnostics you can act onBetter troubleshooting and the data that predictive maintenance needs.
1 Gbps divided by 115.2 kbps is about 8,680. Each gridline step is 100x.
The 10-point scorecard
What owners and facility managers need from a BMS, and what we check for each.
Your assessment rates the network behind each of these, in priority order, as green, yellow or red.
Safety and emergency response
Do fire, access and emergency alerts travel a fast, reliable, prioritized path?
Environmental control
Do HVAC, lighting and air quality controllers stay connected and responsive?
Energy efficiency
Can the network carry the data that scheduling, demand response and analytics need?
Central monitoring and remote access
Is there one secure, IT-approved way to see every system from anywhere?
Fault detection and diagnostics
Is trend logging complete, or are there gaps when the network is busy?
Predictive maintenance
Is equipment data reaching the tools your team uses to plan maintenance?
Cybersecurity and resilience
VLAN segmentation, firewalling, BACnet/SC readiness, and UPS on network gear.
Interoperability and scalability
Open protocols, spare ports and fiber, and room to add devices without lock-in.
Cost control and reporting
Can you produce the energy and performance reports leadership asks for?
Lifecycle and sustainability
Cabling and switch age, documentation, and support for green building goals.
What you get
A clear picture of your BMS network, and a plan you can take to budget.
- On-site or remote walk-throughTelecom rooms, risers, switches and cabling that carry your BAS traffic.
- Written 10-point scorecardGreen, yellow or red for each area above, in plain language.
- Network map of today's setupHow your controllers, panels and head-end actually connect.
- Cybersecurity segmentation reviewVLANs, remote access paths and readiness for BACnet Secure Connect.
- Prioritized fix list with budget rangesWhat to fix now, what to plan for, and roughly what it costs.
- Review call with a TCG engineerBring IT and your controls contractor. We'll get everyone on the same page.
Your cost
No obligation. You keep the scorecard and the map whether or not you hire us.
Book my assessmentHow it works
Three steps. Your team stays focused on the building.
- Step 1
Request
Fill in the two-step form. It takes about a minute.
- Step 2
Walk-through
We schedule around your operations and coordinate with IT and your controls contractor.
- Step 3
Scorecard and roadmap
You get the written scorecard, network map and fix list, then a review call to walk through it.
Proof
Trusted where communications can't go down.
Since 2010, TCG has built the structured cabling, network infrastructure and mission-critical communications that public agencies, transportation, utilities and commercial facilities depend on.
Detroit Metro Airport, Evans Terminal paging upgrade
TCG replaced a 2018 paging system with a state-of-the-art AtlasIED GlobalCom transportation solution running on the Dante audio network.
- All-new microphone stations at the gates
- New amplifiers driving redesigned speaker circuits
- Full, rich audio throughout the terminal
It's the same work your BMS needs: networked building systems that are designed, cabled and documented to stay up.
Emergency response: when you request an emergency response, a TCG technician is on site within 3 hours, billed at emergency service rates.
After the fixes
ServicePAK keeps your BMS network healthy.
Proactive support plans for the infrastructure your building systems run on, and fast, accountable help when something goes wrong.
Questions
Before you book
Is the assessment really free?
Yes. There's no cost and no obligation. You keep the scorecard, network map and fix list whether or not you work with us.
Will you replace our BMS or our controls contractor?
No. TCG is the network layer partner. We design, cable, segment and support the Ethernet and BACnet/IP infrastructure, and we work alongside the controls contractor you already have.
Does our IT team need to be involved?
Ideally, yes. Most BMS network issues sit between IT and facilities. Having both in the room is how the fix list gets approved and done.
What size facilities do you assess?
Single buildings through multi-building campuses, including municipal and government facilities, transit, K-12, healthcare, industrial sites and commercial offices.
What happens after the assessment?
You decide. Some teams take the fix list to their own staff. Others ask us to quote the work, or add a ServicePAK plan for ongoing support.
Where are you located?
TCG is headquartered at 23885 Denton St, Clinton Township, Michigan, and serves public and private facilities across Michigan and beyond.